全国服务热线:400-6869-735

当前位置:首页 > 案例中心 > 路面裂缝、接缝处治方案
路面裂缝、接缝处治方案

路面基层防裂贴、面层贴缝带施工工艺流程

来源:http://www.henanluda.cn发布时间:2018-06-29浏览次数:0次


1、清理裂缝
将裂缝清理干净,并将裂缝两侧20cm范围内的路面同时清理干净。
2、粘贴
剪取长度略长于裂缝长度的一段贴缝带,将隔离纸揭去,以裂缝为中心将贴缝带平整的贴在路面上,当路面温度低于20摄氏度时应对贴缝带加热后再粘贴。
3、碾压
用滚筒或木棰用力碾压将贴缝带至路面,以确保路面结合为一体。
4、开放交通
确保碾压牢固后即可开放交通。


1、To clean up the cracks
Clean up the cracks,and cracks on both sides of the road within 20cm and clean.
2、Paste
The clipping length slightly longer than the crack length is some stickers seam with isolated paper thrown off,and will be posted on seam crack for posted on the road with a flat.When the pavement temperature below 20 degrees Celsius in the face of the stick belt when heated in the paste.
3、Rcc
Rcc will be affixed to sew with a hot paste to the road surface,combined with the road surface to ensure that as a whole,not bubbles,folds firmly with a roller or wooden hammer.
4、Open traffic
Rcc firmly open to traffic.

下一个:暂无

返回列表

XX/Pzr4LnxEGM1bcl6hLjdmDwbfN3n9zjljiQkRly7hChmN/K8Bot/jK1kzPYzrhOOzEoChWJKYAxJKipRzKXNRm8EzfSKjXOmCZYs8FYQ0EjX5H26vPXg==